-
-
- 您现在的位置:首页 >> 产品中心 >> 标准物质 >> 加拿大矿产科学室(CCRMP)加拿大矿产科学室(CCRMP)
-
-
中文名称:铀钍矿成分分析标准物质
英文名称:Uranium-Thorium Ore订货以英文名称为准。
产品编号:DH-1aCAS:/
品牌:CCRMP产地:加拿大
标准值:见证书分子式:/
规格 市场价(元) 折后价(元) 供货周期 数量 加入购物车 200g 0.00 0.00 3-4周 加入购物车
-
-
产品详细介绍
DH-1a铀钍矿成分分析标准物质Uranium-Thorium Ore
Recommended values ± 95% Confidence interval
U 0.2629 ± 0.0003%
Th 0.091 ± 0.003%
Ra-226 31.5 ± 1.1 Bq/g
Pb-210 30.8 ± 0.9 Bq/g
Description
DH-1a is intended as a replacement for DH-1 of which the stock is exhausted. It is ore typical of the property of Denison Mines Limited in Elliot Lake, Ontario, and is a sericitic feldspathic quartzite containing approximately 10% pyrite. The radioactive minerals are uraninite and brannerite and possibly traces of monazite and uranothorite. The bulk material was dry-ground to minus 74 µm, blended and bottled in 200-g units. The homogeneity of DH-1a was confirmed using the volumetric-umpire method for uranium.
Certified values
The certified value of uranium is the mean of 45 determinations by the volumetric-umpire method performed at CANMET to confirm the homogeneity of DH-1a. In addition, a sufficient number of results for uranium were submitted by nine laboratories to give a consensus value of 0.260% and 95% confidence intervals of ± 0.003%. Herein, instrumental techniques, X-ray fluorescence and neutron activation analysis, were predominant. The consensus value for thorium is the unweighted mean of 66 accepted analytical determinations by 12 laboratories. Methods included colorimetry, X-ray fluorescence, neutron activation analysis and radiometry.
Instruction for use
The recommended values for DH-1 a pertain to an "as is" basis.
Legal notice
The Canadian Certified Reference Materials Project has prepared this reference material and statistically evaluated the analytical data to the best of its ability. The Purchaser by receipt hereof releases and indemnifies the Canadian Certified Reference Materials Project from and against all liability and costs arising out of the use of this material and information.
Reference
The preparation and certification procedures used for DH-1a are given in CANMET Reports 81-11E "DH-1a: A Certified Uranium-Thorium Reference Ore", 83-9E "Radium-226 in Certified Uranium Reference Ores DL-1 a, BL-4a, DH-1a and BL-5" and 84-11E "Lead-210 in Certified Uranium Reference Ores DL-1 a, BL-4a, DH-1 a and BL-5" which are available free of charge on request.