-
-
- 您现在的位置：首页 >> 产品中心 >> 标准物质 >> 国立环境标准物质国立环境标准物质
-
-
中文名称：小球藻分分析标准物质
英文名称：Chlorella订货以英文名称为准。
产品编号：NIES-CRM-3CAS：/
品牌：标准物质产地：进口
标准值：见证书分子式：/
规格 市场价(元) 折后价(元) 供货周期 数量 加入购物车 36g 0.00 0.00 3-4周 加入购物车
-
产品详细介绍
Chlorella is typical green algae that breed widely in lakes, rivers and ponds. In recent years, environmental pollution of the aquatic ecosystem by heavy metals and organic compounds is having adverse effects on animals, plants, fish and also on human health. Therefore an urgent requirement is to identify and monitor such substances in the hydrosphere. Besides its value for monitoring water pollution, Chlorella CRM will also be of use in basic studies since chlorella has already been used extensively as a research material.
The material was prepared from spray-dried chlorella (Chlorella pyrenoidosa) obtained from a commercial source. The chlorella powder was blended and bottled. The bottles contain about 36 g of material.
Certified values are provided for K, Ca,Mg, Fe, Mn, Sr, Zn, Cu, Co, while reference values are reported for P, Pb, Cd and Sc.Homogeneity Assessment
In order to estimate homogeneity of the material, the variation of elemental content in several bottles was examined by acid-dissolution followed by inductively coupled plasma emission spectrometry analysis. Eight bottles were randomly selected from the lot of 920 bottles and 3 aliquots were taken from each bottle. For the elements P, K, Ca, Mg, Fe, Mn, Sr, Zn and Cu, variations due to sample variability were estimated to be less than 1 % (as relative standard deviation), indicating that the prepared Chlorella satisfies the homogeneity criteria for a reference material.
Certified Values and Reference Values
The certified values are based on results of determinations by at least three independent analytical techniques. The uncertainties of the certified values were estimated based on consideration of 2 times the standard deviation of the mean of the acceptable values, and of the 95 % confidence intervals for the mean of individual methods.
Certified Values
Content*1Major and Minor Constituent Content*1 (wt. percent) Method*2 Iron 0.185±0.010 a,c,d,f,g,h Calcium 0.49±0.03 a,b,c,d,f,g Magnesium 0.33±0.02 a,c,f,g Potassium 1.24±0.06 a,b,c,d,f Trace Constituent Content*1 (μg/g) Method*2 Manganese 69±5 a,c,d,f,g Strontium 40±3 a,b,c,d,f,g Zinc 20.5±1.0 a,c,d,f,g Copper 3.5±0.3 a,c,d,e Cobalt 0.87±0.05 a,c,f
Based on dry weight: Mean moisture content, approximately 5 %.Method*2
a: Atomic absorption spectrometry b: Flame emission spectrometry c: Inductively coupled plasma emission spectrometry d: X-ray fluorescence spectrometry e: Isotope dilution mass spectrometry f: Neutron activation analysis g: Photo activation analysis h: Spectrophotometry Reference Values
Content*1Element Content*1 (wt. percent) Phosphorus 1.7 Element Content*1 (μg/g) Lead 0.60 Cadmium 0.026 Scandium 0.013
Based on dry weight: Mean moisture content, approximately 5 %.Instruction for Drying
The material should be dried in an air-oven at 85 ℃ for 4 hrs then cooled in a desiccator for 30 min before use. For the determination of volatile elements such as Hg and Se, should be done on samples separate to those for analysis.
Sample Size
A minimum sample weight of 300 mg of the dry material should be used.
Storage
The material should be kept tightly closed in its original bottle and stored in a desiccator at room temperature.
